{"id":658,"date":"2026-01-13T07:39:12","date_gmt":"2026-01-13T07:39:12","guid":{"rendered":"https:\/\/roller-chain-manufacturers.com\/?post_type=product&p=658"},"modified":"2026-08-27T07:17:43","modified_gmt":"2026-08-27T07:17:43","slug":"standaard-dubbelsteek-transportkettingen","status":"publish","type":"product","link":"https:\/\/roller-chain-manufacturers.com\/nl\/product\/standaard-dubbelsteek-transportkettingen\/","title":{"rendered":"Standaard dubbelsteek transportkettingen"},"content":{"rendered":"
\n

ISO C208A \u2013 C232A \u00b7 ANSI C2040 \u2013 C2162<\/p>\n

Standaard dubbelsteek transportkettingen<\/h2>\n

Carbon steel roller chains with twice the pitch of standard drive chain \u2014 lighter weight, lower cost per metre, and full compatibility with ISO \/ ANSI double pitch sprockets. Pitches 25.40 mm to 101.60 mm. Ultimate tensile strength 14.1 kN to 226.8 kN. Small roller (R) and large roller (S) variants. Pre-stretched and pre-lubricated at the factory. Manufactured to ANSI B29.4 \u00b7 ISO 1275 \u00b7 JIS B 1803<\/strong>.<\/p>\n<\/div>\n

<\/p>\n

\n
\n

14<\/p>\n

Chain sizes<\/p>\n<\/div>\n

\n

25.4\u2013101.6<\/p>\n

Pitch range (mm)<\/p>\n<\/div>\n

\n

14.1\u2013226.8<\/p>\n

Tensile strength (kN)<\/p>\n<\/div>\n

\n

R & S<\/p>\n

Roller types<\/p>\n<\/div>\n

\n

3<\/p>\n

Standards met<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Overview<\/p>\n

What Is a Double Pitch Conveyor Chain?<\/h2>\n

\"DubbeleA double pitch conveyor chain shares the same pin diameter, roller diameter, and inner plate depth as a standard roller chain \u2014 but the pitch (pin-centre-to-pin-centre distance) is exactly doubled. Halving the number of links per metre delivers two immediate engineering advantages: lower mass per unit length and a lower component cost. These gains make double pitch chains the preferred choice wherever conveying speed does not require the tight pitch of a power-transmission chain.<\/p>\n

The extended pin design accommodates a wide range of standard and custom attachments \u2014 K-type, A-type, SA-type, and SK-type side-plate tabs for flights, scrapers, pusher dogs, carrier fingers, and crossbar rods. Hollow-pin variants accept cross rods and mesh netting directly through the chain width.<\/p>\n

Because the sprocket pitch circle is larger than an equivalent single-pitch sprocket of the same tooth count, the polygon effect is reduced \u2014 less vibration and quieter operation in packaging lines and textile equipment where smooth product transfer matters.<\/p>\n<\/div>\n

<\/p>\n

\n

Technische gegevens<\/p>\n

Full Specification Table<\/h2>\n

Two roller-diameter \/ weight-per-metre values where listed = small (R) roller first, large (S) roller second. “H” suffix = heavy-duty thick plate.<\/p>\n

\n\n\n\n<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
ISO No.<\/th>\nANSI No.<\/th>\nPitch P (mm)<\/th>\nRoller \u00f8 d\u2081 (mm)<\/th>\nInner width b\u2081 (mm)<\/th>\nPin \u00f8 d\u2082 (mm)<\/th>\nPlate depth h\u2082 (mm)<\/th>\nPlate thick. T (mm)<\/th>\nUTS Q min (kN)<\/th>\nWeight q (kg\/m)<\/th>\n<\/tr>\n<\/thead>\n
C208A \/ C208AL<\/td>\nC2040 \/ C2042<\/td>\n25.40<\/td>\n7.95 \/ 15.88<\/td>\n7.85<\/td>\n3.96<\/td>\n12.0<\/td>\n1.50<\/td>\n14.1<\/td>\n0.50 \/ 0.84<\/td>\n<\/tr>\n

<\/p>\n

C208AH<\/td>\nC2040H<\/td>\n25.40<\/td>\n7.95<\/td>\n7.85<\/td>\n3.96<\/td>\n12.0<\/td>\n2.03<\/td>\n14.1<\/td>\n0.65<\/td>\n<\/tr>\n

<\/p>\n

C208B \/ C208BL<\/td>\n\u2014<\/td>\n25.40<\/td>\n8.51 \/ 15.88<\/td>\n7.75<\/td>\n4.45<\/td>\n11.8<\/td>\n1.60<\/td>\n18.0<\/td>\n0.55 \/ 0.89<\/td>\n<\/tr>\n

<\/p>\n

C210A \/ C210AL<\/td>\nC2050 \/ C2052<\/td>\n31.75<\/td>\n10.16 \/ 19.05<\/td>\n9.40<\/td>\n5.08<\/td>\n15.0<\/td>\n2.03<\/td>\n22.2<\/td>\n0.78 \/ 1.27<\/td>\n<\/tr>\n

<\/p>\n

C212A \/ C212AL<\/td>\nC2060 \/ C2062<\/td>\n38.10<\/td>\n11.91 \/ 22.23<\/td>\n12.57<\/td>\n5.94<\/td>\n18.0<\/td>\n2.42<\/td>\n31.8<\/td>\n1.12 \/ 1.61<\/td>\n<\/tr>\n

<\/p>\n

C212AH \/ C212AHL<\/td>\nC2060H \/ C2062H<\/td>\n38.10<\/td>\n11.91 \/ 22.23<\/td>\n12.57<\/td>\n5.94<\/td>\n18.0<\/td>\n3.25<\/td>\n31.8<\/td>\n1.44 \/ 2.07<\/td>\n<\/tr>\n

<\/p>\n

C216A \/ C216AL<\/td>\nC2080 \/ C2082<\/td>\n50.80<\/td>\n15.88 \/ 28.58<\/td>\n15.75<\/td>\n7.92<\/td>\n24.0<\/td>\n3.25<\/td>\n56.7<\/td>\n2.08 \/ 3.12<\/td>\n<\/tr>\n

<\/p>\n

C216AH \/ C216AHL<\/td>\nC2080H \/ C2082H<\/td>\n50.80<\/td>\n15.88 \/ 28.58<\/td>\n15.75<\/td>\n7.92<\/td>\n24.0<\/td>\n4.00<\/td>\n56.7<\/td>\n2.54 \/ 3.58<\/td>\n<\/tr>\n

<\/p>\n

C220A \/ C220AL<\/td>\nC2100 \/ C2102<\/td>\n63.50<\/td>\n19.05 \/ 39.67<\/td>\n18.90<\/td>\n9.53<\/td>\n30.0<\/td>\n4.00<\/td>\n88.5<\/td>\n3.01 \/ 4.83<\/td>\n<\/tr>\n

<\/p>\n

C220AH \/ C220AHL<\/td>\nC2100H \/ C2102H<\/td>\n63.50<\/td>\n19.05 \/ 39.67<\/td>\n18.90<\/td>\n9.53<\/td>\n30.0<\/td>\n4.80<\/td>\n88.5<\/td>\n3.56 \/ 5.38<\/td>\n<\/tr>\n

<\/p>\n

C224A \/ C224AL<\/td>\nC2120 \/ C2122<\/td>\n76.20<\/td>\n22.23 \/ 44.45<\/td>\n25.22<\/td>\n11.10<\/td>\n35.7<\/td>\n4.80<\/td>\n127.0<\/td>\n4.66 \/ 7.66<\/td>\n<\/tr>\n

<\/p>\n

C224AH \/ C224AHL<\/td>\nC2120H \/ C2122H<\/td>\n76.20<\/td>\n22.23 \/ 44.45<\/td>\n25.22<\/td>\n11.10<\/td>\n35.7<\/td>\n5.60<\/td>\n127.0<\/td>\n5.26 \/ 8.26<\/td>\n<\/tr>\n

<\/p>\n

C232A \/ C232AL<\/td>\nC2160 \/ C2162<\/td>\n101.60<\/td>\n28.58 \/ 57.15<\/td>\n31.75<\/td>\n14.27<\/td>\n47.8<\/td>\n6.40<\/td>\n226.8<\/td>\n8.15 \/ 13.00<\/td>\n<\/tr>\n

<\/p>\n

C232AH \/ C232AHL<\/td>\nC2160H \/ C2162H<\/td>\n101.60<\/td>\n28.58 \/ 57.15<\/td>\n31.75<\/td>\n14.27<\/td>\n47.8<\/td>\n7.20<\/td>\n226.8<\/td>\n9.06 \/ 13.84<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

Standard series (A \/ B)
\nHeavy-duty series (H) \u2014 thicker plates
\nOrange values<\/strong> = key selection parameters (pitch & UTS)<\/div>\n<\/div>\n

<\/p>\n

\n

Product Detail<\/p>\n

Key Features & Construction<\/h2>\n
\n
\n

Standaard<\/p>\n

ANSI B29.4 \u00b7 ISO 1275 \u00b7 JIS B 1803<\/p>\n<\/div>\n

\n

Base Material<\/p>\n

Carbon steel (standard) \u00b7 304 \/ 316 stainless available<\/p>\n<\/div>\n

\n

Oppervlakteafwerking<\/p>\n

Black oxide outer plates \u00b7 nickel-plated & zinc-plated options<\/p>\n<\/div>\n

\n

Roller Options<\/p>\n

R-roller (flush) \u00b7 S-roller (oversized, projects above plates)<\/p>\n<\/div>\n

\n

Bushing & Rollers<\/p>\n

Solid bushing \u00b7 solid rollers (not hollow shell)<\/p>\n<\/div>\n

\n

Factory Prep<\/p>\n

Pre-stretched \u00b7 pre-lubricated \u2014 reduces break-in elongation<\/p>\n<\/div>\n

\n

Attachment Types<\/p>\n

K1\/K2 \u00b7 A1\/A2 \u00b7 SA1\/SA2 \u00b7 SK1\/SK2 \u00b7 custom on request<\/p>\n<\/div>\n

\n

Hollow-Pin Variant<\/p>\n

Available \u2014 accepts crossbars, mesh netting, custom fixtures<\/p>\n<\/div>\n

\n

Supply Length<\/p>\n

Standard 10 ft (3.048 m) box \u00b7 custom reels & cut lengths<\/p>\n<\/div>\n

\n

Verbindingslink<\/p>\n

1 cottered connecting link per box \u00b7 offset links available<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Variants<\/p>\n

Chain Type Guide<\/h2>\n

<\/p>\n

\n
<\/div>\n
\n

R-Roller (Small Roller) \u2014 Standard<\/p>\n

The R-roller sits flush within the link plates. Most common configuration \u2014 used wherever the chain runs on conventional guide rails or over sprocket teeth. Suitable for all standard conveyor applications. ISO suffix: none (e.g., C208A, C212A, C216A). Select the R-roller when space between the chain and guide rail is restricted.<\/p>\n<\/div>\n

\n

R<\/p>\n

Roller type<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
<\/div>\n
\n

S-Roller (Large \/ Oversized Roller)<\/p>\n

The S-roller projects above and below the link plates. Chosen when the conveyed product sits directly on the chain \u2014 the larger surface distributes the load and reduces point stress. The roller also rolls on the support rail directly, rather than the plate edges, which sharply reduces rail wear in long conveyor systems. ISO suffix: “L” (e.g., C208AL, C216AL). Minimum recommended sprocket tooth count: 30 teeth.<\/p>\n<\/div>\n

\n

S<\/p>\n

Roller type<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
<\/div>\n
\n

Heavy-Duty (H) Series \u2014 Thicker Plates<\/p>\n

“H” suffix indicates thicker outer and inner link plates \u2014 for example, 2.03 mm versus 1.50 mm at the 25.40 mm pitch. Average tensile strength rises by 3\u201310% over the standard series; weight per metre increases proportionally. Use the H series when shock loading, frequent starts under load, or heavily loaded inclines are expected. Available in both R and S roller configurations.<\/p>\n<\/div>\n

\n

H<\/p>\n

Serie<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
<\/div>\n
\n

Hollow-Pin Double Pitch Chain<\/p>\n

Replaces the solid pin with a hollow-bore tube, allowing cross rods, cleats, and mesh netting to pass through the full chain width. Used in inclined conveyors for small parts, bakery proofing ovens, laundry tunnel washers, and fish\/poultry processing. Interfit with standard double pitch sprockets and can run alongside standard rollenketting<\/a> on a shared drive. No rollers \u2014 relies on the flat pin surface for support rail contact.<\/p>\n<\/div>\n

\n

HP<\/p>\n

Hollow pin<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Where They Work<\/p>\n

Typische toepassingen<\/h2>\n
\n
\n

Agriculture & Harvesting<\/p>\n

Combine feeders, grain elevators, cotton pickers, bale conveyors. S-roller standard on cotton-field conveyors \u2014 the oversized roller prevents crop material from jamming between chain and rail.<\/p>\n

Recommended: C210AL \u00b7 C212AL \u00b7 C216AL<\/p>\n<\/div>\n

\n

Verpakkingsmachines<\/p>\n

Indexing conveyors, carton erectors, labelling lines. Larger pitch provides positive registration; lighter weight reduces motor load on long runs. Low polygon effect = quieter operation.<\/p>\n

Recommended: C208A \u00b7 C210A \u00b7 C212A<\/p>\n<\/div>\n

\n

Textile Industry<\/p>\n

Fabric transport, tentering frames, dyeing lines. Pre-lubricated construction prevents oil spotting on sensitive materials. Stainless steel variants handle wet-process environments.<\/p>\n

Recommended: C208A SS \u00b7 C210A SS<\/p>\n<\/div>\n

\n

Construction & Road Equipment<\/p>\n

Asphalt pavers, concrete batching plants, aggregate conveyors. Heavy H-series chains in large pitches handle high-tension, high-impact duty cycles in abrasive environments.<\/p>\n

Recommended: C224AH \u00b7 C232AH \u00b7 C232AHL<\/p>\n<\/div>\n

\n

Voedselverwerking<\/p>\n

Bottle lines, can handling, pasteurisers, washdown zones. Stainless steel and nickel-plated variants comply with food-contact hygiene requirements. Hollow-pin versions accept wash-down mesh netting.<\/p>\n

Recommended: C208A SS \u00b7 C210A SS \u00b7 HP variants<\/p>\n<\/div>\n

\n

General Material Handling<\/p>\n

Parts washing, assembly line indexers, paint line hangers, auto-body conveyors. C208A and C210A cover the majority of light-to-medium duty conveyor layouts in automotive and electronics manufacturing.<\/p>\n

Recommended: C208A \u00b7 C210A \u00b7 C212A<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Engineering<\/p>\n

How to Select the Correct Chain<\/h2>\n
\n

<\/p>\n

\n
01<\/div>\n
\n

Calculate the design load<\/p>\n

Multiply maximum working load by a service factor (1.5\u20132.0 smooth; 2.0\u20133.0 moderate shock). Divide the ultimate tensile strength Q by the design load. Target a minimum factor of safety of 7:1. If UTS \u00f7 design load < 7, step up to the next chain size.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
02<\/div>\n
\n

Confirm the pitch<\/p>\n

For speeds below 30 m\/min with loads under 5 kN, start with C208A (25.40 mm pitch). Increase pitch for heavier loads or where a larger sprocket diameter is structurally advantageous. Avoid oversizing \u2014 larger pitch means larger, heavier sprockets throughout the system.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
03<\/div>\n
\n

Choose roller type<\/p>\n

Select S-roller (L suffix) when the conveyed item rests on the chain surface. Select R-roller for enclosed guide-rail systems or where vertical clearance is restricted. S-roller requires \u2265 30 sprocket teeth for smooth meshing.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
04<\/div>\n
\n

Consider the operating environment<\/p>\n

Outdoor \/ wet: black oxide or zinc-plated. Washdown \/ food-contact: 304 or 316 stainless steel. High temperature (> 200 \u00b0C): heat-resistant grade \u2014 contact our engineering team. Abrasive dust \/ grit: add external lubrication or specify self-lubricating bushings.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
05<\/div>\n
\n

Specify attachments<\/p>\n

Identify attachment type (K, A, SA, SK), mounting side (inner or outer plate), and spacing (every link, every 2nd link, etc.). Provide a dimensioned sketch or DXF for non-standard attachment geometry. We confirm feasibility and supply a sample before production.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Matched Components<\/p>\n

Double Pitch Sprockets<\/h2>\n

Double pitch conveyor chain sprockets use a specific tooth geometry for the doubled pitch \u2014 standard single-pitch sprockets of the same tooth count will not mesh correctly and will cause rapid wear of both chain and sprocket. We supply precision-machined flame-cut steel sprockets in three hub configurations:<\/p>\n

\n
\n

Type A<\/p>\n

Flat plate, no hub projection. Bolted to a flange or disc. Lowest cost \u2014 light-duty applications.<\/p>\n<\/div>\n

\n

Type B<\/p>\n

Single-sided hub extension. Keyway and set-screw mounting. Most common general-purpose configuration.<\/p>\n<\/div>\n

\n

Type C<\/p>\n

Double-sided hub. Mid-shaft mounting or where end-float must be minimised.<\/p>\n<\/div>\n<\/div>\n

Stocked for tooth counts 13T \u2013 60T in C208A, C210A, C212A, and C216A pitches. Non-stock tooth counts and bore sizes machined to order \u2014 standard lead time 10\u201315 business days. Split sprockets available where shaft removal is impractical.<\/p>\n

\"Fabrikanten<\/h2>\n<\/div>\n

<\/p>\n

\n

Supply & Logistics<\/p>\n

Packaging & Ordering<\/h2>\n
\n
\n

Standard pack<\/p>\n

10 ft (3.048 m) reinforced export carton, one cottered connecting link per box, individually bagged against corrosion.<\/p>\n<\/div>\n

\n

Custom lengths<\/p>\n

50 ft \/ 100 ft bulk reels or any cut length for OEM orders. Minimum 10 m per configuration for custom attachment chains.<\/p>\n<\/div>\n

\n

MOQ<\/p>\n

One box for standard catalogue items. Samples available for qualification testing \u2014 request with chain number and length required.<\/p>\n<\/div>\n

\n

Levertijd<\/p>\n

Stock items ship in 3\u20135 business days. Custom attachment and non-standard grades: 10\u201320 business days ex-factory.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

Ready to order or need a sample?<\/p>\n

Tell us your ISO or ANSI chain number, roller type, attachment requirements, quantity, and delivery country. Our technical team responds within one business day.<\/p>\n<\/div>\n

Vraag een offerte aan \u2192<\/a><\/div>\n<\/div>\n
bewerkt door gzl<\/div>","protected":false},"excerpt":{"rendered":"

Dubbele steek transportkettingen<\/strong> Dit zijn rollenkettingen met een grotere steek dan standaard rollenkettingen. Deze kettingen worden vaak gebruikt in transporttoepassingen en zijn verkrijgbaar in vele uitvoeringen. Ze kunnen rechte of gebogen zijplaten hebben en veel modellen beschikken over extra functies. Ook maatwerk is mogelijk. Dubbelsteek transportkettingen worden veel gebruikt in de landbouw, de bouw en de wegenbouw. \u200b\u200bZe kunnen ook worden toegepast in verpakkings- en textielmachines.<\/p>","protected":false},"featured_media":689,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[1401],"product_tag":[],"class_list":["post-658","product","type-product","status-publish","has-post-thumbnail","product_cat-roller-chain","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/roller-chain-manufacturers.com\/nl\/wp-json\/wp\/v2\/product\/658","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/roller-chain-manufacturers.com\/nl\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/roller-chain-manufacturers.com\/nl\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/nl\/wp-json\/wp\/v2\/comments?post=658"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/nl\/wp-json\/wp\/v2\/media\/689"}],"wp:attachment":[{"href":"https:\/\/roller-chain-manufacturers.com\/nl\/wp-json\/wp\/v2\/media?parent=658"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/nl\/wp-json\/wp\/v2\/product_brand?post=658"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/nl\/wp-json\/wp\/v2\/product_cat?post=658"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/nl\/wp-json\/wp\/v2\/product_tag?post=658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}