{"id":706,"date":"2026-01-14T01:04:58","date_gmt":"2026-01-14T01:04:58","guid":{"rendered":"https:\/\/roller-chain-manufacturers.com\/?post_type=product&p=706"},"modified":"2026-08-26T05:28:35","modified_gmt":"2026-08-26T05:28:35","slug":"xich-con-lan-cuong-do-cao-c100hsp-00-danh-cho-may-xuc-caterpillar","status":"publish","type":"product","link":"https:\/\/roller-chain-manufacturers.com\/vi\/san-pham\/xich-con-lan-cuong-do-cao-c100hsp-00-danh-cho-may-xuc-caterpillar\/","title":{"rendered":"X\u00edch con l\u0103n c\u01b0\u1eddng \u0111\u1ed9 cao C100HSP-00 d\u00e0nh cho m\u00e1y Caterpillar"},"content":{"rendered":"

<\/strong><\/p>\n

\n

Ever-power Engineer Class Chain<\/p>\n

C100HSP-00 High Strength Roller Chain<\/h2>\n

31.75 mm pitch \u00b7 250 kN min. tensile strength \u00b7 >10 million cycle fatigue life \u00b7 ISO\/GB compliant<\/p>\n

Direct drop-in for standard 100-1 drives \u2014 no sprocket changes required<\/div>\n<\/div>\n

<\/p>\n

\n
\n
\n

\u0110\u1ed9 b\u1ec1n k\u00e9o<\/p>\n

250 kN<\/p>\n

\u226525% above standard 100-1<\/p>\n<\/div>\n

\n

S\u00e2n b\u00f3ng \u0111\u00e1<\/p>\n

31.75 mm<\/p>\n

Standard 100-series (1-1\/4\u2033)<\/p>\n<\/div>\n

\n

Cu\u1ed9c s\u1ed1ng m\u1ec7t m\u1ecfi<\/p>\n

>10M<\/p>\n

Cycles at rated load<\/p>\n<\/div>\n

\n

C\u00e2n n\u1eb7ng<\/p>\n

5.92 kg\/m<\/p>\n

Confirm with order sheet<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

The C100HSP-00 is a heavy-duty, high-strength roller chain engineered for continuous operation under extreme load and vibration conditions. With a minimum tensile strength of 250 kN, a pitch of 31.75 mm, and a validated fatigue life exceeding 10 million cycles, it is a dependable drive component for quarrying equipment, construction machinery, and heavy industrial production lines where standard roller chains would fail prematurely.<\/p>\n

Unlike standard 100-1 roller chain, every component in the C100HSP-00 uses a dedicated alloy grade selected for its structural role \u2014 42CrMo case-hardened pins, 35CrMo heat-treated rollers, 20CrMo carburised sleeves, and 40Mn alloy steel plates. The result is a chain that occupies the same envelope as a standard 100-series drive but delivers a substantially higher load margin, extending replacement intervals and reducing unplanned downtime costs.<\/p>\n

<\/p>\n

Dimensional & Performance Specifications<\/h2>\n

All values per GB\/T 8350 \/ ISO 10823 unless noted. Verify with order confirmation for batch-specific data.<\/p>\n

\"B\u1ea3n<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Tham s\u1ed1<\/th>\nGi\u00e1 tr\u1ecb<\/th>\nNotes<\/th>\n<\/tr>\n<\/thead>\n
Model \/ Chain No.<\/td>\nC100HSP-00<\/td>\nHigh-strength series, simplex<\/td>\n<\/tr>\n
S\u00e2n b\u00f3ng \u0111\u00e1<\/td>\n31.75 mm (1-1\/4\u2033)<\/td>\nISO \/ GB standard 100-series pitch<\/td>\n<\/tr>\n
Inner Width (b\u2081 min)<\/td>\n19,05 mm<\/td>\nCompatible with standard 100-series sprockets<\/td>\n<\/tr>\n
Roller Diameter (d\u2081 max)<\/td>\n19,05 mm<\/td>\n35CrMo heat-treated roller<\/td>\n<\/tr>\n
Pin Diameter<\/td>\n9.55 mm<\/td>\n42CrMo alloy, case-hardened<\/td>\n<\/tr>\n
Plate Height (h\u2082 max)<\/td>\n30.2 mm<\/td>\n40Mn alloy steel, shot-peened<\/td>\n<\/tr>\n
Min. Tensile Strength<\/td>\n250 kN<\/td>\n\u226525% above standard 100-1 rating<\/td>\n<\/tr>\n
Weight per Metre<\/td>\napprox. 5.92 kg\/m<\/td>\nVerify with order confirmation<\/td>\n<\/tr>\n
Cu\u1ed9c s\u1ed1ng m\u1ec7t m\u1ecfi<\/td>\n>10,000,000 cycles<\/td>\nValidated under rated load, controlled test<\/td>\n<\/tr>\n
Ti\u00eau chu\u1ea9n<\/td>\nGB\/T 8350 \u00b7 ISO 10823<\/td>\nHeavy-duty design class<\/td>\n<\/tr>\n
Available Lengths<\/td>\nCut-to-length \/ bulk reel<\/td>\nConnecting links supplied as standard<\/td>\n<\/tr>\n
Surface Finish<\/td>\nNatural \/ shot-blasted<\/td>\nPre-lubricated option on request<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

Component Materials & Part Numbers<\/h2>\n

Each component uses a dedicated alloy grade \u2014 not a single material applied across all parts.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
#<\/th>\nPart Number<\/th>\nTh\u00e0nh ph\u1ea7n<\/th>\nMaterial & Treatment<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\nC100HSP-00-01<\/td>\nT\u1ea5m x\u00edch ngo\u00e0i<\/td>\n40Mn alloy steel, shot-peened<\/td>\n<\/tr>\n
2<\/td>\nC100HSP-00-02-MA<\/td>\nGhim<\/td>\n42CrMo alloy steel, case-hardened<\/td>\n<\/tr>\n
3<\/td>\nC100HSP-00-03<\/td>\nT\u1ea5m x\u00edch b\u00ean trong<\/td>\n40Mn alloy steel, shot-peened<\/td>\n<\/tr>\n
4<\/td>\nC100HSP-00-04<\/td>\nTay \u00e1o<\/td>\n20CrMo alloy steel, carburised & quenched<\/td>\n<\/tr>\n
5<\/td>\nC100HSP-00-05<\/td>\nCon l\u0103n<\/td>\n35CrMo alloy steel, induction-hardened<\/td>\n<\/tr>\n
6<\/td>\nC100HSP-00-06<\/td>\nT\u1ea5m n\u1ed1i<\/td>\n40Mn alloy steel<\/td>\n<\/tr>\n
7<\/td>\nC100HSP-00-07-MA<\/td>\nCh\u1ed1t k\u1ebft n\u1ed1i<\/td>\n42CrMo alloy steel, case-hardened<\/td>\n<\/tr>\n
8<\/td>\nGB\/T 91-2000<\/td>\nCh\u1ed1t ch\u1ebb<\/td>\nStandard grade spring steel<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

Key Performance Features<\/h2>\n

<\/p>\n

\n
\n
\n

\u25b6 Dedicated Alloy Grades Per Component<\/p>\n

The 42CrMo pin resists shear and bending fatigue. The 35CrMo roller absorbs repeated impact without spalling. The 20CrMo sleeve maintains bore geometry over long service intervals. The 40Mn plate is shot-peened to introduce compressive surface stress that delays fatigue crack initiation. No cost-saving single-grade compromises.<\/p>\n<\/div>\n

\n

\u25b6 250 kN Tensile Strength \u2014 No Sprocket Changes<\/p>\n

At 31.75 mm pitch, a standard 100-1 chain breaks at around 200 kN. The C100HSP-00 raises this to a minimum of 250 kN \u2014 a 25% increase \u2014 while keeping identical external dimensions. Existing 100-series sprockets remain fully compatible. Operators upgrade chain strength without retooling or re-engineering the drive.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
\n

\u25b6 >10 Million Cycle Validated Fatigue Life<\/p>\n

Fatigue life is measured, not estimated. For a 24-hour continuous drive running at 1,500 RPM, 10 million cycles corresponds to roughly 111 hours of non-stop operation \u2014 repeated over the chain’s service life. In practice, maintenance intervals are predictable and planned, reducing emergency downtime costs significantly.<\/p>\n<\/div>\n

\n

\u25b6 Pre-lubricated Option for Sealed Environments<\/p>\n

Optional factory pre-lubrication packs grease into the pin-sleeve-roller interface at assembly, under controlled pressure. This extends the initial lubrication interval to 200+ hours and is recommended for enclosed drives where re-lubrication access is difficult or where contamination must be minimised.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Typical Applications<\/h2>\n
\n
\n
\n

Quarrying & Mining<\/p>\n

Crusher feed conveyors, screen drives, and underground haulage systems. Constant exposure to dust, abrasive grit, and shock loading demands the higher plate strength and alloy pin specification of the HSP series.<\/p>\n<\/div>\n

\n

Construction Machinery<\/p>\n

Main drive chains on concrete batching plants, piling rigs, tower crane slewing mechanisms, and large material hoists. Intermittent peak loads and outdoor exposure are managed by the heat-treated alloy construction throughout.<\/p>\n<\/div>\n

\n

Heavy Manufacturing<\/p>\n

Transfer conveyors, press feeds, automated assembly lines, and stamping plant transfer systems. Sustained high-speed operation with minimal downtime tolerance benefits from the validated fatigue life and predictable replacement scheduling.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n
\n
\n

Forestry & Timber Processing<\/p>\n

Log infeed decks, debarker drives, and sawmill transfer chains. Impact loading from irregular log dimensions and bark debris contamination are the primary life-limiting factors \u2014 both addressed by the induction-hardened roller and carburised sleeve.<\/p>\n<\/div>\n

\n

Bulk Material Handling<\/p>\n

En-masse conveyors, apron feeders, drag-chain systems for aggregates, coal, and mineral concentrates. The C100HSP-00’s higher tensile rating allows designers to reduce chain strand count in twin-strand drives or increase the design safety factor in single-strand configurations.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Installation & Maintenance Guidelines<\/h2>\n
\n

\u26a0 Note on sprocket condition: Always inspect sprocket tooth profiles when fitting a new chain. Fitting a new chain on a worn sprocket will halve the expected service life of the replacement. When tooth profile loss exceeds 10%, replace sprocket and chain together.<\/p>\n<\/div>\n

<\/p>\n

\n
\n
1<\/span><\/div>\n
\n

C\u0103n ch\u1ec9nh \u0111\u0129a x\u00edch<\/p>\n

Misalignment of more than 1 mm per metre of shaft centre distance accelerates plate wear. Check alignment with a straight-edge or laser alignment tool at every chain replacement.<\/p>\n<\/div>\n<\/div>\n

\n
2<\/span><\/div>\n
\n

Initial Chain Sag<\/p>\n

Set chain sag at 2\u20133% of the horizontal span. Over-tensioning loads the pin and sleeve interface unnecessarily and is as damaging as excess slack.<\/p>\n<\/div>\n<\/div>\n

\n
3<\/span><\/div>\n
\n

Lubrication Interval<\/p>\n

Clean environments: re-lubricate every 200 hours with ISO VG 100\u2013150 gear oil. Dusty or wet conditions: reduce to every 50\u201380 hours using a grease-barrier product to block contamination ingress.<\/p>\n<\/div>\n<\/div>\n

\n
4<\/span><\/div>\n
\n

Elongation Limit \u2014 Replace at 1.5%<\/p>\n

Measure pitch elongation with a 10-link gauge. At 1.5% elongation, rollers begin riding up the sprocket teeth, accelerating wear on both chain and sprocket. Do not exceed this threshold.<\/p>\n<\/div>\n<\/div>\n

\n
5<\/span><\/div>\n
\n

Connecting Link Specification<\/p>\n

Use only the supplied C100HSP cotter-pin connecting link. Do not substitute a spring clip \u2014 the cotter pin design is specified for this load class and rated tensile strength.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Compatible Sprockets<\/h2>\n

The C100HSP-00 runs on any standard 100-series sprocket (31.75 mm pitch, ISO 606 tooth profile). Ever-power Engineer Class Chain Co.,Ltd supplies matched sprockets in the configurations below. Contact us with tooth count and bore size to confirm the right specification.<\/p>\n

\n
\n
\n

\u2699<\/p>\n

C45 Carbon Steel<\/p>\n

Standard grade. Suitable for most industrial drives. Available in plain bore or finished bore.<\/p>\n<\/div>\n

\n

\u2699<\/p>\n

42CrMo Alloy Steel<\/p>\n

Heavy-duty grade for high-load, shock-loaded, or high-cycle applications. Taper-lock hub option available.<\/p>\n<\/div>\n

\n

\u2699<\/p>\n

Cast Iron<\/p>\n

Low-speed, low-cost bulk handling. Suitable for speeds below 0.5 m\/s where cost per unit is the primary driver.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

About Ever-power Engineer Class Chain Co.,Ltd<\/h2>\n

Ever-power Engineer Class Chain Co.,Ltd manufactures and exports industrial chain products to buyers in Europe, North America, Australia, and Southeast Asia. Our range covers x\u00edch con l\u0103n<\/a>, engineering class conveyor chains, Grade 80 and Grade 100 lifting chains, mining chains, and marine-grade chains for offshore and aquaculture applications.<\/p>\n

All products are manufactured under ISO 9001 quality management with third-party certification where required \u2014 including Lloyd’s Register, ABS, Bureau Veritas, DNV, and CE marking for European markets. We supply in standard reel lengths or cut-to-order with matching connecting links, offset links, and attachment plates. Material test certificates are provided on request.<\/p>\n

\"<a<\/p>\n

Contact us for pricing and lead time<\/a><\/div>\n<\/div>\n

<\/p>\n

C\u00e2u h\u1ecfi th\u01b0\u1eddng g\u1eb7p<\/h2>\n
\n
\n

What is the rated tensile strength of the C100HSP-00?<\/p>\n<\/div>\n

\n

The minimum tensile strength is 250 kN. This exceeds the standard ISO 100-1 specification by at least 25%, achieved through premium alloy steels and a controlled heat-treatment process for each component individually.<\/p>\n<\/div>\n<\/div>\n

\n
\n

Is the C100HSP-00 a direct replacement for a standard 100-1 roller chain?<\/p>\n<\/div>\n

\n

Yes. The external dimensions \u2014 pitch, roller diameter, and inner width \u2014 are identical to a standard 100-1 chain. Existing 100-series sprockets are fully compatible. No modifications to the drive system are required.<\/p>\n<\/div>\n<\/div>\n

\n
\n

How often should the chain be lubricated?<\/p>\n<\/div>\n

\n

In clean, enclosed environments: every 200 operating hours using ISO VG 100\u2013150 oil. In abrasive, wet, or outdoor environments: every 50\u201380 hours. Use penetrating chain oil or a grease-type product suited to the operating conditions. Do not run the chain dry.<\/p>\n<\/div>\n<\/div>\n

\n
\n

When should the chain be replaced?<\/p>\n<\/div>\n

\n

Replace when pitch elongation reaches 1.5% as measured over a 10-link span, or when visible plate cracking, roller damage, or seized joints are found during inspection. Replace chain and sprocket together at this point to prevent the new chain from being accelerated-worn by the old sprocket profile.<\/p>\n<\/div>\n<\/div>\n

ch\u1ec9nh s\u1eeda b\u1edfi gzl<\/p>","protected":false},"excerpt":{"rendered":"

X\u00edch con l\u0103n c\u01b0\u1eddng \u0111\u1ed9 cao C100HSP-00 mang l\u1ea1i \u0111\u1ed9 b\u1ec1n v\u00e0 kh\u1ea3 n\u0103ng ch\u1ed1ng m\u1ecfi v\u01b0\u1ee3t tr\u1ed9i (>10 tri\u1ec7u chu k\u1ef3) cho thi\u1ebft b\u1ecb h\u1ea1ng n\u1eb7ng Caterpillar trong khai th\u00e1c m\u1ecf, x\u00e2y d\u1ef1ng v\u00e0 c\u00e1c \u1ee9ng d\u1ee5ng c\u00f4ng nghi\u1ec7p. N\u00e2ng cao hi\u1ec7u su\u1ea5t v\u00e0 \u0111\u1ed9 tin c\u1eady\u2014\u0111\u1eb7t h\u00e0ng ngay \u0111\u1ec3 t\u1ed1i \u0111a h\u00f3a th\u1eddi gian ho\u1ea1t \u0111\u1ed9ng.<\/p>","protected":false},"featured_media":731,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[1401],"product_tag":[],"class_list":["post-706","product","type-product","status-publish","has-post-thumbnail","product_cat-roller-chain","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/roller-chain-manufacturers.com\/vi\/wp-json\/wp\/v2\/product\/706","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/roller-chain-manufacturers.com\/vi\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/roller-chain-manufacturers.com\/vi\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/vi\/wp-json\/wp\/v2\/comments?post=706"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/vi\/wp-json\/wp\/v2\/media\/731"}],"wp:attachment":[{"href":"https:\/\/roller-chain-manufacturers.com\/vi\/wp-json\/wp\/v2\/media?parent=706"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/vi\/wp-json\/wp\/v2\/product_brand?post=706"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/vi\/wp-json\/wp\/v2\/product_cat?post=706"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/roller-chain-manufacturers.com\/vi\/wp-json\/wp\/v2\/product_tag?post=706"}],"curies":[{"name":"trang web","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}