Description
ISO 606 · DIN 8187 · ANSI B29.1
Pitch 15.875 mm (5/8 in.)
44.5 kN Tensile Strength
NBR / NR Rubber Pad
Alloy Steel · SS304 · SS316
10B Series · G2F5 Profile · Elastomer-Bonded
Chaîne à rouleaux supérieure en caoutchouc 10B-G2F5
ISO 606 base chain with vulcanized elastomeric pad — 15.875 mm pitch, 44.5 kN minimum tensile strength, 2.58 kg/m. Designed for non-marring conveyance of fragile, finished, or high-value goods where standard steel contact causes surface damage.
44,5 kN
Résistance minimale à la traction
Dimensional Specifications
| ISO 606 · 10B-G2F5 · Complete Dimensional Data |
| Numéro de chaîne |
P (mm)
Pas |
d1 max
Roller Ø |
b1 min
Inner W |
d2 max
Pin Ø |
L max
Pin Len |
h2 max
Plate H |
UN
Pad W |
B
Pad L |
H
Total H |
T
Plaque T |
Q min
kN / lbf |
q
kg/m |
| 10B-G2F5 |
15.875 |
10.16 |
9.65 |
5.08 |
39.7 |
14.70 |
33.30 |
30.00 |
25.3 |
1.50 |
44.5 / 10,004 |
2.58 |
| ※ All values per ISO 606 / DIN 8187. Dimensions are nominal. Certified inspection reports available on request. |
Table: 10B-G2F5 chain dimensions — pitch, roller, inner width, pin, plate geometry, tensile strength, mass.
The 10B-G2F5 Rubber Top Roller Chain is a hybrid conveyance component that bonds a factory-vulcanized elastomeric pad profile directly onto the outer link plates of an ISO 10B base chain. The designation is precise: 10B identifies the ISO 606 chain with a 15.875 mm pitch; G2F5 specifies the flat-face pad geometry — a continuous rubber surface bonded across the full conveyor-running width of the chain.
The engineering problem it solves: how to move delicate, finished, or geometrically irregular products with positive traction — without scratching, denting, or fracturing the surface. Bare steel will always mark soft timber, glass, or glazed ceramics. The G2F5 rubber pad eliminates that risk while adding grip, acoustic damping, and vibration absorption unavailable in any standard roller chain.
At roller-chain-manufacturers.com, the 10B-G2F5 is supplied as a standard stocked item and in OEM configurations built to customer drawings. Both the steel base chain and the elastomeric pad can be tailored — alloy steel, SS304, SS316, NBR, NR — matching the exact chemical, thermal, and mechanical demands of your line.
Chain Base
Acier allié
40Mn · 42CrMo · 20CrMo
High fatigue cycle, standard industrial use
Stainless Options
SS304 / SS316
Food · Pharma · Coastal
Passivated or mirror-polished finish
Rubber Pad — Grip
NR — Natural Rubber
Shore A 65–75 · Max friction
Dry incline conveyance, woodworking
Rubber Pad — Oil-Resist
NBR — Nitrile Rubber
Shore A 75–85 · Oil & fat resistant
Food processing, packaging lines
Traitement de surface
6 Options
Shot peening · Blackening
Zinc / Nickel plating · Passivation
Matched to environment
Logistique
20–45 Day Lead
Fumigated wooden cases / pallets
OEM volume & standard stock both available
Tensile Strength & Fatigue Life
Precision heat treatment of link plates and press-fit pins delivers 44.5 kN minimum tensile strength with balanced ductility — resisting elongation over high-duty continuous cycles of 16–24 h/day.
Elastomeric Damping & Noise Reduction
The vulcanized rubber pad absorbs micro-vibrations and reduces structure-borne noise — critical in regulation-compliant factories. Shore A hardness is configurable: 65–75 for maximum grip, 75–85 for wear-resistant high-cycle duty.
Solid Roller & Smooth Sprocket Engagement
Solid roller design minimises chordal action (polygonal effect), delivering stable conveyor surface velocity. Matched 10B sprockets — hardened HRC 45–55, PD calculated for 15.875 mm pitch and 10.16 mm roller — extend service life measurably.
Multi-Environment Adaptability
Woodworking → alloy steel + NR pad. Food processing → SS316 + FDA-compliant NBR + passivation. Ceramics kilns → blackened/nickel-plated steel + Shore 75–85 pad. One platform, configured for four distinct operating environments.
Typical Application Industries
🪵
Woodworking & Panel
Feeds sanded plywood, MDF, veneer, and composite boards through planers and saws without surface marking. NR rubber grips without indenting soft grain.
NR PAD RECOMMENDED
🔲
Glass Manufacturing
Cushions shock loads to prevent brittle fracture. High friction coefficient prevents sheet glass from sliding on inclined sections. Critical in float glass and photovoltaic panel lines.
SHORE 65–75
🏺
Ceramics & Kiln Lines
Absorbs conveyor vibration that cracks greenware or misaligns glazed tiles before firing. Stable lateral support reduces reject rates in high-throughput tunnel kilns.
BLACKENED STEEL
🥫
Food & Packaging
NBR resists fats and cleaning agents. SS316 base meets sanitary standards. Stable platform preserves package orientation through labeling, filling, and boxing.
SS316 + NBR
Guide de sélection des pignons
Pitch Diameter Formula
PD = P ÷ sin(180° / N)
P = 15.875 mm · N = tooth count
Sprocket Specification
High-carbon steel body
Induction-hardened teeth: HRC 45–55
Roller bore: accommodates 10.16 mm roller Ø
Stock Range
8T through 114T
Pilot bore & finished bore
Matched 10B series inventory
Mismatched geometry or excessive sprocket runout accelerates roller wear and risks delaminating the rubber pads through erratic oscillation. Contact our technical team with shaft diameter and center distance to receive a matched chain-and-sprocket proposal.
Standards Compliance:
ISO 606
DIN 8187
ANSI B29.1
Certified inspection reports, material certs, and RoHS/REACH documentation available on request.
fabricants-de-chaînes-à-rouleaux.com
Request a Quote or Custom Configuration
Send pitch requirement, environment conditions, and annual footage — receive a material spec and price within 24 hours.
ISO 606 · DIN 8187 · ANSI B29.1
édité par gzl
